Just the same thing about 2 weeks ago with a cheap Tioga 700 x 23 tube, the valve separated from the tube when out riding my '86 Peugeot fixie .
This never happened to me when using Michelin Airstop or other quality tubes.
Peter Tutty Londonderry, NSW, Australia.
Kurt Sperry <haxixe@gmail.com> wrote: Odd. I recently got a similar flat a couple weeks ago on a clincher tube on
my Bartali near the valve stem where it attatches to the rest of the tube. I was able to patch it, but I'd never had a leak there before, it was on the
wrong side of the tube! It was a cheapo Chinese made inner tube probably though, that's all my nearby LBS has on hand. I get WAY fewer flats now that I don't spend an hour or two everyday riding. Kurt Sperry Bellingham WA
On 6/28/05, Steve Maas wrote:
>
>
> gpvb1@comcast.net wrote:
> ........
> >
> > When I got home, I looked at the flat tire more closely. It appears tha
t
> > the valve separated from the tube, so it looks like the tire is a goner
.
> > But I don't know why it happened.
> .....
>
> This isn't all that unusual, either with tubulars or clinchers. I've had
> it happen to me several times. I just replaced a tube with that problem
> about a week ago. I suspect that it is related to the progressively
> lower quality of fabrication. You're lucky that you haven't experienced
> it earlier.
>
> Steve Maas
> Long Beach, CA
>
>
>
>
>
> _______________________________________________
>
-- fineartscrimshaw.com
_______________________________________________
---------------------------------
Yahoo! Sports
Rekindle the Rivalries. Sign up for Fantasy Football