Re: [CR]frame protection

(Example: Component Manufacturers:Avocet)

From: "Peter Weigle" <jpweigle@sbcglobal.net>
To: "Classicrendezvous@Bikelist.Org" <classicrendezvous@bikelist.org>
References: <20051231212752.1903.qmail@web30214.mail.mud.yahoo.com>
Subject: Re: [CR]frame protection
Date: Sat, 31 Dec 2005 16:49:46 -0500
reply-type=original

Scott, How about using Frame Saver? e-Ritchie, Matteo Brandi, and Ben Kamenjas say its good stuff, Ben really likes it, look at the archives! So does,,, oh never mind. Email me off list if you have questions about it ok.
Peter Weigle
Lyme Ct.


----- Original Message -----
From: scott Baxter
To: classicrendezvous@bikelist.org
Sent: Saturday, December 31, 2005 4:27 PM
Subject: [CR]frame protection



>I just took receipt of a '58 Frejus Professional
> frameset and I'd like to make sure that it lasts as
> long as possible. In particular I'd like to know what
> steps I would need to take in order to stop any rust
> that may be inside the tubes, and what is the best
> method of sealing them. I've taken a look down the
> seat tube and in the bottom bracket and would feel a
> lot better if I could get the light rusting I'm seeing
> shut down and sealed. Ordinarily I'd run naval jelly
> down the seat tube and slather it around the bottom
> bracket, but I don't know what's the best thing for
> the chainstays since they're narrow and the jelly is
> way too thick to be cleared out once I stuff it in
> there and sling it around.
>
>
>
> __________________________________________
> Yahoo! DSL - Something to write home about.
> Just $16.99/mo. or less.
> dsl.yahoo.com