Re: [CR]Need advice on doing a hub swap.

(Example: Humor:John Pergolizzi)

In-Reply-To: <505740.61808.qm@web82710.mail.mud.yahoo.com>
From: "Anthony Bier" <scratcheduprecord@hotmail.com>
To: jmpiwonka@yahoo.com, classicrendezvous@bikelist.org
Subject: Re: [CR]Need advice on doing a hub swap.
Date: Fri, 20 Apr 2007 18:15:31 -0400


Jeff, thanks for the advice, I must clarify that I am usuing the same rims and spokes and switching out the hubs. I now believe this to be okay (read a response to the same question by Jobst Brant saying if they are new and you are confident they have low miles it should be okay). However, my task is significantly more difficult as I will have to remove all the spokes and keep them separated into leading and trailing RS and LS and be sure to put them back in the position and be sure to relace the used campy hub such that leading and trailing are in the same postions are the original lacing.... Now I am looking at a couple evenings worth of work.

thanks

Anthony Bier

Vancouver, BC

From: jeffrey piwonka <jmpiwonka@yahoo.com>

To: Anthony Bier <scratcheduprecord@hotmail.com>, classicrendezvous@bikelist.org

Subject: Re: [CR]Need advice on doing a hub swap.

Date: Fri, 20 Apr 2007 15:09:09 -0700 (PDT)
>i did this with a dura ace hub i got...i had to move
>to one cross lacing from radial lacing since i used an
>aero rim and the ERD was different...i reused the
>nipples too, but nipples are real cheap so i would
>replace them if i were you.
>i also used some light sandpaper to polish/clean the
>bladed spokes.
>
>if you want to reuse spokes your new rim needs to be
>real close in profile to the old one and you should
>keep spoke orientation the same...as in leading stays
>leading and trailing stays trailing.
>nipples are inexpensive...butted spokes are reasonable
>and bladed spokes are expensive.
>
>Jeff Piwonka
>austin, texas, usa
>
>
>--- Anthony Bier <scratcheduprecord@hotmail.com>
>wrote:
>
> >
> >
> > I want to swap the suntour superbe pro hubs out of a
> > set of 32H tubular wheels (campy rims) for a set of
> > Record hubs, assuming the dimensions are more or
> > less the same and I use new nipples is there any
> > danger in doing this? I want the bike to be all
> > campy and the hubs are the only thing holding me
> > back, but if I have to spend $45 on new straight
> > gauge spokes I don't see it being worth it since
> > functionality won't change. Additionally, the spokes
> > are bladded (i know sort of off topic) and I like
> > them and I don't want to know how much new bladded
> > or butted spokes would cost. I am asking here
> > because I am sure this delima has come up with all
> > the people here restoring vintage bikes.
> >
> > thanks
> >
> > Anthony Bier
> >
> > Vancouver, BC
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
> > ------------------------------------------
> > Fine Dining & Fancy Food.
> > ------------------------------------------
> > Check Out This Collection Of Restaurants
> > ------------------------------------------
> >
> > ------------------------------------------
> >
> >
> >
>
> > _______________________________________________
> > Classicrendezvous mailing list
> > Classicrendezvous@bikelist.org
> >
>http://www.bikelist.org/mailman/listinfo/classicrendezvous
> >
>

------------------------------------------ Build a winning team this season! ------------------------------------------ Use all new Windows Live Messenger NHL Stats Agent! Get the Agent now-Free ------------------------------------------

------------------------------------------

_______________________________________________ Classicrendezvous mailing list Classicrendezvous@bikelist.org http://www.bikelist.org/mailman/listinfo/classicrendezvous