I can supply a NOS ASC indicator - Gary can you get in touch off-line please.
Hilary Stone, Bristol, England
Harvey Sachs wrote:
>
> Gary DellaRossa wrote:
>
> I am looking to buy a Sturmey Archer ASC toggle/indicator spindle;
> alternatively, what can I use in place of the original that will work?
> Perhaps a modified 4 speed toggle?? Thanks for your input Sheldon!
>
> My Sturmey Archer manual, ca 1953, shows the indicator rods/chains for a
> lot of models. For the ASC, the piece that is inside the hub, the
> "indicator," is unique to the ASC. However, a good machinist should be
> able to modify the FW, FG, FM, FC part to work. The "coupling," which
> is the piece with the chain, is shared with those models. Unfortunately,
> the pictures are not dimensioned, but look to be at 1:1 so you can put a
> part on the picture to check what it is.
>
> good luck!
>
> harvey sachs
> back in McLean VA
> with obligations dating back to Stronglight 99s and a Claud Butler fork.