Re: [CR]Teledyne Bottom Bracket

(Example: Production Builders:LeJeune)

References: <33437419.1195396885705.JavaMail.root@mswamui-cedar.atl.sa.earthlink.net>
To: nickzz@mindspring.com, classicrendezvous@bikelist.org
Subject: Re: [CR]Teledyne Bottom Bracket
Date: Sun, 18 Nov 2007 11:37:39 -0500
In-Reply-To: <33437419.1195396885705.JavaMail.root@mswamui-cedar.atl.sa.earthlink.net>
From: <oroboyz@aol.com>


<< Anybody familiar with Teledyne bottom brackets? Just removed one from an older frame. Only markings are stamped on the axle. TELEDYNE?? 68-R-120 11 bearings with retainer rings, alloy fixed cup with flats and two opposing holes for removal{Campagnolo wrench pins won't fit}, alloy adjustable cup with standard holes for removal{Campagnolo wrench pins? fit}. The axle is non-magnetic and appears to be titanium. >>

Teledyne only made the axle. Those cups are someone else's... In-the-day, we used Campagnolo cups. I bet you have an aftermarket company's cups, like FT Bologna, Cobra, etc.

Dale Brown cycles de ORO, Inc. 1410 Mill Street Greensboro, North Carolina USA 336.274.5959 http://www.cyclesdeoro.com http://www.classicrendezvous.com

-----Original Message----- From: Nick Zatezalo <nickzz@mindspring.com> To: CR List <classicrendezvous@bikelist.org> Sent: Sun, 18 Nov 2007 9:41 am Subject: [CR]Teledyne Bottom Bracket

Anybody familiar with Teledyne bottom brackets?

Just removed one from an older frame. Only markings are stamped on the axle.

TELEDYNE 68-R-120

11 bearings with retainer rings, alloy fixed cup with flats and two opposing holes for removal{Campagnolo wrench pins won't fit}, alloy adjustable cup with standard holes for removal{Campagnolo wrench pins fit}.

The axle is non-magnetic and appears to be titanium.

Thanks,
Nick Zatezalo
Atlanta,Ga.USA