>...
> http://www.velo-orange.com/gr1axwinu.html
> There isn't much info provided about them, but
> I am looking for a wheel set that will accept
> these wing nuts.
> The threaded hole for the rear nut is just
> under 3/8" and the front nut is about 1/4".
> Hope that helps.
Beau,
Have hou checked out the actual sizes by using some existing
hubs of axles? I would expect the front wing-nuts to be 5/16"
by 26 TPI, and the rears to be 3/8" by 26 TPI. There are many
NOS hubs avaailable using those axle sizes. Some were
originally meant for BMX bikes. Others were simply meant for
decent-but-inexpensive road use, that are currently being sold
as "fixed gear" parts.
Cheers,
Fred Rednor - Arlington, Virginia, USA
____________________________________________________________________________________
Never miss a thing. Make Yahoo your home page.
http://www.yahoo.com/r/hs