Re: [CR]Re: stuck cable ends


Example: Component Manufacturers:Avocet

Date: Fri, 2 May 2008 13:24:56 -0700 (PDT)
From: bruce thomson <masi3v4me@yahoo.com>
Subject: Re: [CR]Re: stuck cable ends
To: classicrendezvous@bikelist.org, worthy2@earthlink.net
In-Reply-To: <12267018.1209741435632.JavaMail.root@elwamui-cypress.atl.sa.earthlink.net>


Since the center ferrule on the brake handle has a direction

Bruce Thomson Spokane WA 99204 (509) 747 4314 Masi3v4m

--- On Fri, 5/2/08, worthy2@earthlink.net &l wrote:

From Subject: [CR]Re: s To: classicrendezvous@bikelist.org Date: Friday, May


>Hi Tom...
>
>The cable head is
>
>Around 620 F vs
>
>Get a butane torc
>Wear a heavy glov
>it down and pul
>pull right ou
>
>I've done it... B
>of this
>
>Don Williams
>Woodinville Washington USA
>
>On Thu, May 1, 2008 at 6:26 PM, Tom Hayes <hayesbikes@gmail wrote:
>> Anyone have an easy solution (or given my cu them in
>> this condition, I will ac that
>> have the hea no plac e to

dremm el
>> and very thin drill bit, only to have two of th
>>
>> Thanks for the help and for giving me
>> traveling to Trexlertown tomorr
>>
>> Cheers.
>>
>> Tom Hayes &g
>>
>> Tom, As Don sugge ntrol t

rs in ammonia. If that doesn't loosen the corrosion bond, move up to pho oric acid, but watch this closer as it's more aggressive if the solu
   concentrated. Applying "gentle" heat (less than the 620ยบ requ to melt lead) may expand the aluminum enough to aid dislodging
   When and if all this failed, then I'd go to the big hea
   Don says wear welder's gloves, eye protection and a ). Good luck, Alan Goldsworthy San Fran