[CR]Please help if you can Need a few washers to finish my Campy SR
brake calipers
(Example: Framebuilders:Doug Fattic)
From: "Mark Cutrufelli" <rena.cutrufelli@comcast.net>
To: "'Classic Rendezvous'" <classicrendezvous@bikelist.org>
References: <44818cc20802211946k29bebc66o93d562a90d03ed30@mail.gmail.com>
Date: Thu, 21 Feb 2008 23:48:48 -0500
In-Reply-To: <44818cc20802211946k29bebc66o93d562a90d03ed30@mail.gmail.com>
Thread-Index: Ach1BZs/+8u+K026T6K0zLqEDb5nHQAB/P6w
Subject: [CR]Please help if you can Need a few washers to finish my Campy SR
brake calipers
Would anyone happen to have a pair (or better 2 pairs) to sell of the flat
thin plain washers that go on either side of the inner arm on the brake
pivot bolt? Note there .5 mm difference in hole diameter (6.5 vs 7.0mm, the
one closest to the spring is the 7.0mm) but they are the same thickness=.5mm
and same diameter. I have a pic if needed.