[CR]Attn: Eric Elman

Example: Framebuilders:Richard Moon

From: "mikel66132@juno.com" <mikel66132@juno.com>
Date: Sun, 24 Feb 2008 02:50:52 GMT
To: Classicrendezvous@bikelist.org
Subject: [CR]Attn: Eric Elman

eric, the go-ds of polishing were not with me today. i tried to remove the vis able black from a set of bars and a seatpost with decent results. most o f the black is gone but not without light scratching to the area.

i began with mild sandpaper but had to switch to a heavier grade. i then
   used a polishing compound with a mild abrasive hoping to remove the scr atches. from 2 feet the parts looks nice, from 2 inches o.k. i dont have a polishing wheel and not inclined to get one. i've used a d rill attachment with a soft chamois in the past. what does the barron of
   buffing wheel recommend? mike goldman warwick,r.i.