Charles:
No such animal. A 70-SS-120 NR spindle is 113 mm long.
A 70-SS NR spindle is 115.5 mm long.
Your current 68-SS-120 spindle is 112 mm long.
Which do you need?
Greg Parker Ann Arbor, Michigan USA
Date: Tue, 18 Mar 2008 16:59:55 -0700 From: "Charles F Nighbor" <cnighbor@pacbell.net> To: <classicrendezvous@bikelist.org> Subject: [CR] Need Campagnolo 70-SS-120 Bottom Bracket Axle 115.5 mm
I am in need of a very good condition 70-SS-120 Bottom Bracket Axle with these dimensins, ''A slightly off-set this axle measures 28MM from the inside of the bearing shoulder to the end on one side and 30.5MM on the other side. The total width is 115.5MM. I am going to use this axle in a 68mm wide Cinelli bottom with a spacer to push fixed cup out 1/8''+ to allow more room between rear stay and inner 42T ring on NR crankset. Now at 3/32'' maximum. My present Campagnolo 68-SS-120 axle just does not allow enough room. The frames rear drop out spacing is 120mm.
Thanks and please contact me off CR
Charles Nighbor
Walnut Creek, CA