[CR] Old Age vrs Crank Lengths

(Example: History)

From: "Jon Spangler" <jonswriter@att.net>
Date: Fri, 23 Jul 2010 18:04:20 -0700
To: Dale Brown <classicrendezvous@bikelist.org>
Cc: RICHARD HOWARD <rehoward1@verizon.net>
Subject: [CR] Old Age vrs Crank Lengths


Richard,

What do your physical therapist and orthopedist (preferably of the sports medicine certified variety) say? Have you asked them?

Not being an expert, I would swap out those 175s for 170s ASAP. It is a relatively cheap and easily-accomplished experiment. Ask your sports orthopedist or physical therapist for advice. You will want to modify your seat position, too, I would think...

If they are not bike-fit knowledgeable, ask for a referral to a PT or sports chiropractor who is a bike fit expert. If those avenues fail, check back with your local bike shop(s) and ask their fitting experts.

Locally, I would recommend my friends at Cycle Sports bike shop in Oakland or my buddy, Jessica Graux, DC, who does great bike fitting in Berkeley, CA:

http://www.innersport.com/index.php/2010/03/crank-arm-length-what-you-should-know/

You might call or visit other local CR listers and shop owners in VA or thereabouts:

Wayne Bingham at Velo Classique (540-338-8376; PO Box 2069, Purcellville, VA)

or Dale Brown at Cycles de Oro (1410 Mill Street, Greensboro, North Carolina 27408; 336-274-5959)

(These are the only two references I can think of that are in your "neighborhood," but I'm in Alameda, CA and on the wrong coast to know who else might be closer to you.)

Jon Spangler who has less-than-pristine hips in Alameda, CA

Linda Hudson Writing TEL 510-864-2144 CEL 510-846-5356 JonSwriter@att.net http://www.linkedin.com/in/jonmspangler http://www.twitter.com/jonmspangler

===========

Message: 5 Date: Fri, 23 Jul 2010 05:04:34 -0700 (PDT) From:RICHARD HOWARD <rehoward1@verizon.net> Subject: [CR] Old Age vrs Crank Lengths To: classicrendezvous@bikelist.org Message-ID: <519559.20286.qm@web84401.mail.ac2.yahoo.com> Content-Type: text/plain; charset=us-ascii

I am 65 years old and have been using 175 mm cranks since my first real bike in 1967. I have had a total knee replacement and lost enough range of motion in the affected knee that it impacts on my ability to ride smoothly. The problem is mostly at the 12 o'clock position of the affected crank arm. It is a struggle to power over the top. I am thinking about switching to 170 mm cranks or even 165mm. Considering the skeletal shrinkage that also automatically comes with old age, I am thinking that 165 may be optimal. Has anyone else had a problem similar to this? Did you create any new problems for yourself while solving the targeted problem?
                                                         Dick Howard
                                                         Roanoke, Virginia
                                                         USA