Mark Bulgier wrote:
>http://bulgier.net/pics/bike/Campy/RubberShifterCovers.jpg shows the
>different styles I found in my junk pile just now. Note some have
>"cuffs" and some don't; also note the different sizes.
>
>Assuming the oldest ones had an open-C typeface, these must all be
>newer, so there are probably still more styles out there (one more at
>least).
I would be very surprised if Campagnolo actually "made" any of these.
Campagnolo's expertise was and is in metalworking, not rubber moulding. Most likely these were jobbed out to one or more outside subcontractors.
Sheldon "No Inside Info On This" Brown
+---------------------------------------------------+
| In theory, there's no difference between theory |
| and practice; but, in practice, there is. |
+---------------------------------------------------+,
--
Harris Cyclery, West Newton, Massachusetts
Phone 617-244-9772 FAX 617-244-1041
http://harriscyclery.com
Hard-to-find parts shipped Worldwide
http://captainbike.com
Useful articles about bicycles and cycling
http://sheldonbrown.com