Feb. 15, 09
Hello Scott,
until Campagnolo adopted Ultra-Torque, all their bottom brackets had standard ISO taper. You can mate the Veloce crank with the NR bb without problems, the chain line will simply be a few more mm to the right.
Greets
Kai Hilbertz Munich, Germany
On 15.02.2009, at 18:10, Scott Alan Smith wrote:
> Does anyone know if I can put a Campy Veloce compact crankset onto a
> Nuovo
> Record bottom bracket? The Veloce wants a symetrical 111mm spindle
> lenght a
> nd the N.R. is assymetrical 114.5mm. But are the square tapers
> compatible?
> It seems to snug onto the spindle fine and I tightened the Veloce
> crank arm
> s down but am afraid to put any load onto them until I know if I am
> doing s
> omething wrong (other than the compact onto a classic N.R. BB or a
> compact
> onto a Masi for that matter...)
>
> Thanks!
>
> -Scott Alan Smith
> Van Nuys
> CA
>
> "You dumb mug, get your mitts off the marbles before I stuff that
> mud-pipe
> down your mush--and tell your moll to hand over the mazuma."